Elastic bands for hair from foamiran "Bell ringing"

Pin
Send
Share
Send

Plastic suede is practical in products and is not afraid of water.

For work we take materials:
- foamiran blue 1 mm thick and yellow with sparkles 2 mm thick.
- scissors.
- lighter.
- Moment glue.
- satin ribbon 2.5 cm wide green.
- soldering iron.
- a piece of glass or ceramic tile.
- dense blue fabric.
- scrunchy.
- blue art oil paint.
- a piece of foam.
First we draw a flower pattern, it looks a bit like a fan. In our blank we make 5 petals connected together and arranged in a semicircle.

Since we have two elastic bands, according to the template, we cut out 6 blanks per one. According to the pattern, we cut 12 petals from suede.

Paint with foam rubber in dark blue on the edges of all the blanks on both sides.

Now we proceed to the processing of these petals. First, fold the accordion in height and knead with your fingers. Under the warmth of your hands, suede will become softer and straighten the workpiece.

Then with the help of a lighter on the edges of the petals we make twists. Under fire, they curl themselves into a tube. And in the middle of the workpiece we heat the flame and immediately with two thumbs we make a recess.

In this way we cook all the petals.

Now we take gold-colored suede with sequins and cut the blanks for stamens. Each flower will have 3 pieces, so we need 36 blanks. The sticks will be 2 cm high, 0.5 cm thick, and the top of the stamens made in the shape of a square, so we cut out strips 1.5 cm long and 0.8 cm wide.

Using the “Moment” glue we attach wide strips folded in half on sticks.

We proceed to the production of bells, from one blank there will be 1 flower. On the workpiece, grease a thin strip with glue and press the second edge onto it. We get a cone with a hole in the upper part.

And in the middle of the flower we insert and fix three stamens.

For one gum we make 6 bells.

Now we take a green ribbon, cut strips for leaves. You need 6 strips of 8 and 5 cm long.

Take a soldering iron and ceramic tiles. We cut the small strips hot diagonally, from one corner to another and get two high triangles. And we fold the long green blanks in half, cut the fold, and folded together these strips we also cut diagonally, but we get two short triangles connected together.

Now for one gum we prepare 2 circles of dense fabric, 4 cm in diameter and a small strip of the same length. Take 5 more long and short green triangles.

We take the usual elastic for hair and glue it on one of the circles on the front side. Then, with a strip, we additionally attach this elastic to the base, and we glue the second circle from the fabric from below, the inside is obtained inside.

On the base without gum we glue flowers. Let's start with the markup. We put 5 strokes with a pencil, distributing evenly throughout the circle.

First we fasten five wide triangles, along the outlined lines, with the wrong side to the base.

Now we glue the bells between the leaves, placing the narrow side to the middle of the base.

Take tall green triangles and glue them in between the flowers, closer to the middle of the base.

There is only one flower left, which we fasten in the middle of the resulting composition with a narrow edge to the base. The gum is ready.

But we have two such decorations.

Good luck to all.

Pin
Send
Share
Send