If you have a lot of shoes, then for its compact and convenient storage it is more expedient to use a whatnot.
And it is not necessary to buy it - you can do it yourself. And it will turn out no worse than the purchased one.
For work, metal round bars, a corner and pieces of chipboard of suitable sizes will be required. Also, instead of chipboard, you can use a furniture board or plywood.
First of all, the author cuts ten metal bars of the desired length (in this case, the length of each bar is 1 meter).
The main stages of work
At the next stage, it will be necessary to cut off 4 identical pieces of the corner. In each you need to drill five holes.
Next, we insert previously prepared steel bars into these holes, and scald along the ends.
The result should be two rectangular frames on which the shoes will be located.
After that, you will need to saw off four pieces of chipboard. We fasten our frames to two of them. Then we fix the remaining two pieces - collect the box.
If you use a furniture board or plywood, then the sheets will need to be painted or varnished.
For details on how to make a simple bookcase for storing shoes, see the video on our website.
