To make the home workshop or garage a little lighter and more comfortable, as well as comfortable to work, just make competent additional lighting. For this, an LED strip is quite suitable.
You will also need a metal profile, which is used to install drywall with a width of 28 mm. But, in principle, any other metal profile can be used.
From it you need to assemble a rectangular frame with dimensions of 75 * 70 cm. Next, you will need to cut four more segments from the metal profile 75 cm long, and insert them into the frame parallel to each other.
The main stages of work
At the next stage, you can proceed with the installation of the LED strip itself and soldering the wires. An electric soldering iron and solder are required.
Then it remains only to connect the power supply for the LEDs. To save money, you can buy used on the radio market.
The LED lamp is installed above the workplace. Thus, there will be directional lighting - to work in such conditions is much more comfortable and convenient. And the costs are minimal. You can meet the budget of 600-700 rubles.
For details on how to make your own LED lighting for a workshop or garage, we recommend that you look in the video on the website. Write in the comments below the video, did you like this idea?
