If you want the interior in your workshop to be unusual and original, then be sure to make yourself such a lamp in the Loft style. At first glance, such a design seems complicated, but in reality, making this device is possible for everyone.
Manufacturing process
The main element of the lamp is a steel cap from an oxygen cylinder - it is ideal for this homemade product. It must be cleaned from paint and rust, and then one through hole should be drilled in the upper part.
Further, from a steel strip of suitable thickness and width, it will be necessary to cut plates of different sizes (long, medium and short), in which then it is necessary to drill holes. In this case, the edges of the plates are preferably rounded.
Lamp assembly
One long and one middle plate must be connected to each other using a screw with a nut - a similar operation must be done with all the plates. Then the workpieces are stacked close to each other at a certain angle and are connected with screws and nuts.
Next are welding work: two short plates must be welded to the corner, and an L-shaped mount to the cap from the cylinder. After that, all the elements are connected together, a cartridge is inserted into the cap, the wire is drawn through the holes in the plates.
Well, then it remains only to tighten the corner and fix the entire structure on the wall. You can see the detailed process of manufacturing and assembling the lamp in the video on our website.
