We sew a cover on a chair with our own hands

I present to you a workshop on tailoring a chair cover. On his tailoring used old denim pants and the remains of curtain fabric. A piece of sintepon is needed on the interlayer. Its size should correspond to the size of the chair. Material costs are minimal. Need your desire, thread and machine. Let's get started!
1. We have such a chair. Its top has worn out and has lost its "salable" appearance. Let's try to refresh it.
2. We take a large sheet of paper. Turn over the chair. We put it on paper.
3. Draw a pencil around the outline.
4. Cut out. We get a pattern cover.
5. Materials: old jeans and trimmed green fabric.
6. Cut out the patterns. A square whose side is 7.5 cm. A triangle whose sides are 7.5 cm.
7. Use the heart-shaped patchwork block template.
8. Cut out: six green squares, eight green triangles, two blue squares, eight blue triangles.
9. From the blanks we fold the block.
10. The block consists of four stripes.
11. Sew on the typewriter the first strip. We steam it with an iron. Then, sew the remaining strips.
12. Ready-made strips are sewn together.
13. Cut strips of denim. The width of the strips is 4 cm. The length is equal to the width of the finished block.
14. Make a frame around the block.
15. Cut the same stripes of green fabric. And we frame the block.
16. Cut 14 cm denim strips. Sew on as shown in the photo.
17. Cut a piece of padding polyester. It should be the size of the pattern.
18. Making a sandwich: purl, synthetic winterizer, patchwork block. Pins off.
19. We make a stitch machine seam in seam.
20. We turn the chair over. Unscrew the screws.
21. We have a quilted fabric on a seat. Align well.
22. We fasten a cloth on a reverse side of a seat. This can be done with strong threads. You can use the construction stapler.
23. Twist the screws. We admire our work.

Watch the video: Chair Building - How To Build A Chair With Basic Hand Tools (May 2024).