In this review, the author decided to modify the usual pliers in order to increase their functionality.
And although the pliers are not designed to unscrew the nuts, the author believes that such a homemade product has the right to life.
The first step is to remove the protective coating from the handles of the pliers, and then cut off part of the handles with a grinder (approximately to the middle).
Next, you will need to make cuts at the ends of the handles, and then cut off the excess to get "steps".
The main stages of work
At the next stage, the author cuts two pieces of the plate and drills holes in them. Then these blanks will need to be welded to the handles of the pliers.
After that, the author makes new elongated handles, which act in this case as a lever.
For the manufacture of pens, the author uses scraps of steel pipes. They need to weld metal plates.
After welding, part of the plates must be cut off. Then the handles must be joined together.
At the last stage, it remains only to connect the pliers themselves and the new elongated handles together. All connections are rivets.
Do you think this device will work, because the pliers are not designed for this. Or maybe if you take the Soviet, it will work out? Write your opinion in the comments below the video.
