To make even furrows in the ground (at an equal distance from each other), a special device is often used - a marker. At the same time, it can also be used as a scoop - for loosening the soil.
In this review, the author shows how to make a collapsible ralo-marker with your own hands (that is, all connections are bolted). This is very convenient, especially if you do not leave the tool in the area, but carry it with you.
A feature of this home-made design is the ability to adjust the distance between the wells, which is also very convenient. In general, the tool is definitely useful in the garden or cottage.
The main stages of work
The first step is to cut off two pieces of a round pipe (metal) and drill holes in them. Then the master welds nuts into the holes (a bolt is inserted into them first).
Pipe sections must be welded along the edges of the corner. Triangular tips made of sheet metal will be inserted and fixed into them.
The master also cuts two pieces of pipe of different diameters to make a telescopic handle (that is, adjustable in length).
The lower part of the handle is welded to the corner (frame). Then the author drills one hole at the edges of the corner. This is necessary in order to secure 2 jibs from metal strips.
After all the parts are prepared, they must be cleaned with a grinder and painted. And then you can start assembling. For details on how to make a collapsible marker marker for summer cottages, see this video.
