Today on the Internet you can find many different homemade products for the house (both really worthwhile, and absolutely unnecessary and useless).
In this review, the author proposes to make a device with which you can quickly stir sugar in a mug or glass without a spoon.
Whether this thing is useful or not is up to you. We just consider the manufacturing process and the principle of operation of this device.
For homemade work you will need an electric motor, a Krona battery, an engine speed regulator and two neodymium magnets.
The main stages of work
First of all, it will be necessary to connect the electric motor, the power source (the Krona battery), the speed regulator, and the on / off button to the wires.
Then, from a multilayer sheet of cardboard, the author makes a case in which it will be necessary to place the electronic filling. Hot-melt adhesive is used to fix pieces of cardboard.
Further, the author cuts out two round blanks from plywood, which will need to be glued together on PVA glue. Round neodymium magnets are installed in the drilled holes.
After that, a magnetic "mallet" is put on the motor shaft, and is covered with a small cardboard box on top. Now the homemade product is ready - it remains only to experience this adapt in practice.
Principle of operation
From a piece of thin stainless steel wire, the author makes the last detail that he immerses at the bottom of the mug. The mug itself needs to be installed on a cardboard pad, and you can turn on the device.
Neodymium magnets will begin to spin, and with them the wire part will also spin, forming a funnel. Sugar grains fall into a whirlpool and quickly dissolve in a hot drink.
Before drinking tea or coffee (or another drink), it will be necessary to remove the wire part from the bottom of the mug.
