A home-made desktop (as well as floor) mini holder is designed to fix overall objects and sheet materials: plywood, particleboard, OSB, etc. And moreover, this device can be made from scraps of a profile pipe.
The master uses a mini desktop holder to hold the sheets of plywood and doors on the table in an upright position. And the device does its job perfectly.
The first step is to cut off two pieces of the profile and weld them together with the letter “G”. Then the resulting workpiece must be welded to a piece of the building corner. Welds must be cleaned with a grinder.
The main stages of work
Further, from the pieces of the profile pipe, it is necessary to weld two more parts of the L-shaped form. First in the blanks you need to cut out the "wedge" and bend them at right angles. Then they will need to weld two longer nuts.
Pieces of the profile pipe with nuts must be welded to the main workpiece, which was welded first. Details are welded to one of the shelves of the corner.
Then it remains only to do the last two details: this will require two threaded rods, two nuts and a pair of washers. Well, then you can start assembling the entire structure and painting.
For details on how to make a simple desktop mini holder for fixing overall objects, see the video on the website.
