To make a stylish bluetooth speaker in the form of a soccer ball with your own hands, you will have to try a little. However, the end result will justify all the effort. The body of the column will be made of plywood, so you can not do without a band or circular saw. In extreme cases, you can use a manual jigsaw.
Work process
First of all, 32 squares must be cut from a plywood sheet. Then we make the markup and cut out 20 hexagonal and 12 pentagonal “fragments”. Perhaps the most time-consuming process for making a Bluetooth speaker is polishing the ends of the cut parts. In total, 240 faces will need to be polished at a certain angle, so patience should be gained.
After polishing, all 32 fragments must be sized and glued - in the end, you should get a full-sized soccer ball. Only wooden. For gluing, it is best to use hot melt glue, because if glued with joiner's PVA, it will take a lot of time. Also, for a Bluetooth speaker, you need to make a wooden stand to which the ball will be attached.
We fasten the "stuffing" into the case
In the resulting wooden soccer ball, you need to make four holes for installing the speakers. Also in the upper part or inside the stand you will need to place passive emitters, without which, in order to get high-quality and clear sound, you can not do.
At the last stage of the assembly, the power supply and amplifier are installed. For a detailed process for making a Bluetooth speaker, see the video on the website. Write in the comments, did you like this option of a homemade speaker for home?
