This method will be relevant when it is difficult to find a whole original spare part. The rusty fragment is completely removed from the wing, and the metal nearby is processed from corrosion. Using masking tape, the shape of the arch is restored, after which it must be covered with a layer of epoxy. Having strengthened the recreated part with fiberglass, you can begin to putty.

For work, you will need: a bottle of champagne, water-based paint, sponge, a variety of ribbons, beads, cattle or colored adhesive tape, scissors, glue super moment gel, threads, a needle. 1. Take a bottle of champagne and remove the label. The easiest way to do this is by placing the bottle for several hours in water, then the stickers do not tear and are removed very easily.

Go straight to the point. Necessary ingredients: 1) sausages 4 pieces and 2 curds. Replacement options for the sea, both the best and the worst. Sausages can be replaced without loss by sausage. Cheese is better to take gently, gently. The best option is to take processed cheese in the baths - it is more tender. If you want a thicker soup - take more cheese.

The arch at the entrance to the kitchen or other room in the house and apartment can be made non-standard - rectangular in shape. Moreover, everyone, even a novice home master, will cope with this task. This idea should appeal to those who are not going to install the door to the kitchen, but do not want to mess with drywall, making a traditional arch.

Fum tape, like flax (tow), is often used to seal threads on pipes and other threaded connections when installing water supply elements of a home network. But many people refuse this seal, since it is not always possible to ensure normal tightness with it.

You always want to capture the bright moments of childhood as a keepsake, only the kid himself is rarely distracted from his studies in order to look into the camera lens. And a temptation toy that can be easily made independently can serve as a creative way out. We need: a sewing machine, felt of attractive colors, matching threads and a needle, agrotex, eyes, glue moment, scissors.

As a rule, a column is called a vertical support, or an architectural element having a pillar-like structure. In this article, we will look at an example of a column with a width of 4 bricks. The masonry of this design was made of standard facing bricks. This work is carried out in several stages. First, careful marking of the column follows.

The antenna is made of two 0.5 liter beer cans, fastened with four M5 screws with two nuts on each to a wooden plank. To get inside the cans with bolt fastening, a U-shaped technological window is cut with a knife at the top of the cans, then it is unbent. After installation, the technological windows are bent to their original position, and from below the cans are pierced with an awl through 1 hole, which protects the cans from the accumulation of rainwater.

By screwing a self-tapping screw into a solid tree, you can encounter tearing a notch on his hat or tearing off the head itself. As a result, a screwdriver or screwdriver can no longer unscrew damaged hardware. Despite such difficulties, it is possible to remove a damaged screw, and in several ways. Recovering a notch on a soft hat For soft screws, a notch on the head breaks even when screwing it in, so then it is problematic to dismantle it later.

Such a smokehouse can be made with your own hands in just one hour (or even less), while it will require a minimum of materials to make it. As the main tank, we will use a 200-liter metal oil barrel, which must first be well burned. But let's talk about everything in order.

When working on a drilling machine, sometimes it is necessary to make holes in parts that cannot be clamped in a vice and put to the machine in the right way. We will solve this problem by making a simple and convenient fixture. Please note that this homemade product also helps to avoid jamming of the drill during drilling and solves the problem of sloppy holes.

After a fisherman visited a reservoir unfamiliar to him, overgrown with algae and grass, and lost a couple of good lures, the desire to catch in this place is chopped off. In this case, you need to pay attention to homemade baits, which are not expensive to manufacture and do not mind losing them. Often in overgrown ponds there are a lot of fish that hunt in such places and probably would not mind to enjoy artificial baits.